These products are non-staining, high performance mineral oil based lubricant, having good cooling abilities. They are specially developed for high speed and deep drawing application of metals. They provide optimum film strength, lubricity and good metal wetting characteristics.
PAL DRAW-ST is blended with fatty oil to improve wetting characteristics. It is stable, non-staining, mineral oil based lubricant, recommended for Aluminium wire drawing operation.
PAL DRAW-ST-2 is blended by using high perforamnce base oils and fortifed with a combination of Anti Wear and Extreme Pressure Additives to sustain higher loads during the drawing operations. Besides having the good cooling characteristics, the oil also provides a stable oil firlm between the metal surface and prevents the metails from breakages, rupture etc.
PAL DRAW-EP is chlorinated extreme pressure (EP) type, blended with fatty oils and free sulphur making it ideally suited for most severe drawing conditions. It offers high degree of finish of the tube bar both internally and externally. It is widely used for deep drawing and cold rolling of Stainless Steel tubes.
Dark Colour liquid
Kinematic Viscosity, cSt @40ºC
Kinematic Viscosity, cSt @100ºC
Flash Point, COC,ºC, min..
Copper Strip Corrosion, @100ºC, max.
Neutralization No. mg KOH/gm
Four Ball Weld Load, kg
Timken OK Load, 1bs min.
Four ball WSD @40kg mm max.
* The specifications are subject to variations/development/customization.