These are water displacing type rust & corrosion preventives. These form soft film, solvent deposited & can be applied directly to the water wet metal surfaces where they form a protective film after the displacement of water.
PAL RUSTOP 910, 920, 940 are based on blends of film forming materials, corrosion inhibitors to enhance the performance in salt spray & humidity cabinet tests. These are also incorporated with special type of wetting agents which will adhere to the parts.
The protective films of these grades can be removed by wiping off with rags or waste soaked in kerosene / mineral turpentine oils or by alkaline degreasents.
PAL RUSTOP 910 is especially recommended for protection during storage of machine tools & components. PAL RUSTOP 920 has a wide application for protection of components with high degree of finish, in machine shops & heavy machinery & plant manufacturing e.g. machinery tools, fasteners, metal strips etc. Because of its excellence performance in salt spray & humidity cabinet, it can be applied on components to be freighted by sea. PAL RUSTOP 940 is recommended for the protection of components which are wrapped in paper especially fasteners etc.
Health: This product is not expected to produce adverse effects on health when used for the intended application. However prolonged or repeated skin contact with this oil is injurious to health. Clean properly with soap and water. Environment: Lubricant should not be disposed in drain, soil and water. To be disposed through licensed/authorized collector of lubricants only.
210 Ltr. ,50 Ltr., 20 Ltr.
PAL RUSTOP 910
PAL RUSTOP 920
PAL RUSTOP 940
Amber Clear Fluid
Specific Gravity @30ºC, min.
Flash Point, COC, ºC, min.
Film Thickness Microns
Salt Spray Test
Time 120 Second or below passes the test
Time 60 Minutes or below passes the test
* The specifications are subject to variations/development/customization.